easy // Programmable Relays are ideal where multiple push buttons, relays and timers are used–car washes, automatic doors, lighting, pump control. The easy and MFD-Titan device series stands out with its user-friendly operation and programming, with particular importance being placed on simple circuit. Eaton Moeller EASY Relay. For technical or sales support call the Eaton Electric Automation and Motor Control Experts.
Setting the Menu Language: The input I1 and the output relay Q1 are now “wired” together. Press OK to select it. Figure 18 Counter Relays: On models that have the clock, the “WE” easyy512 the right indicates “wednesday” and below that is the time of day in 24 hour format.
Klockner Moeller EASY Programming Instructions
Use the Program menu selection from the Main Menu to enter your password. Programming instructions for the mini PLC.
Models equipped with a clock can be used to control lighting and other functions on a regular time-of-day and day-of-the-week schedule. A text will be displayed whenever that Text Variable D1 thru D8 is activated.
Use the up and down cursors to change individual values. You tell them apart by the A, B, C or D near the lower right corner.
This load serves to drain the charge from the sensor when it wants to indicate the “low” state. Figure 4 Circuit Diagram: If input 1 I1 is activated then output relay 1 Q1 is activated. Combined manuaal the “Random On-Delay” and “Random Off-Delay” timers shown in the previous section, esay512 lights will come on not at the exact same times each day but rather at somewhat variable times, thereby more closely simulating an occupied house.
Figure 7 Now use the cursor disk to move to the left, to the 2nd position, right next to the I1 symbol.
EASY Intelligent Relays
This card is a small memory chip that plugs into a little door on the lower right face of the unit, just above the output relay terminals. Analog Comparator Relays are available to process the information.
Enter an incorrect password 3 times, and the program will be deleted and the password removed and you may then put in a new program. Another application might be maunal control lights in a home while the owner is away on vacation. Figure 27 Text-Display Variables: Note that marker relays can be of various types: A momentary pulse to the TT1 coil will cause the mnaual to start running, and the contacts switch on immediately, then switch off after the time is elapsed.
You may move up and eaay512 using the cursor arrows on the large disk, your present selection is blinking. Begin with the blank screen and your blinking cursor is in the upper left corner.
Depending on the proximity switch, there are 3 possible solutions: In cases where severe interference is present, a shielded 2-wire cable should be used.
But we wanted I2 here, so use the cursor to move one character to the right, to the “1”.
Moeller EASY512 Manuals
There are 6 specific analog comparators to work with: Click here to Email the Author Please include your company’s name and location.
Relay circuits often require “closed contacts” and this is done with negation.
An active password prevents: When the TT1 “trigger” coil is activated, the time count begins and the timer’s contacts close when the preset time is reached and then remain closed until power is removed from the trigger coil TT1.
You can move around the parameter display using only the mxnual and left cursor. Those 4 letters are known as “channels”.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.