More info on the Electrix Repeater than anyone could ever want, and more is on its way! Electrix Repeater manual pdf – from the Electrix site. The uniquely styled Electrix carton should containÉ o Electrix Repeater o Warranty Card o Repeater User Manual o International Switching Power Supply ( with a. Documents, presets, manuals Electrix Repeater MKII – Audiofanzine.
Along those lines, we would like to hear what you can do with Repeater and other Electrix gear. Electrix Repeater Brochure pdf – from the Electrix site. Once the end of the loop is reached, Repeater always repeats it along with any overdubbed parts.
Enter text from picture: This means that in its current state, you cannot remove the outputting sound of elsctrix 1 using the fader on the unit. You now have a 4-bar track. Overdubbing with automatic level reduction is clever– again, no brain power or extra work mixing together subsequent layers. Repeater can store up to different loops on CFC or 16 loops internally.
Electrix Repeater Addendum User Manual
Any Repeater users out there want to help out? In overdub mode, Repeater will mix the recording with the existing material on the selected track without erasing the original recording.
Reepeater sure this would be an easy fix for anybody with basic electronics knowledge. In the Studio Setup create a device I have been using these loopers in my live show for the last 5 years as a solo musician and absolutely swear by them.
Electrix Repeater First shown: The drum loop still only takes up one bar’s worth of memory. While the metronome is playing Repeater will quantize the initial record to the beat of the metronome. The Tempo knob controls the destination. Putting Repeater into User sync will prevent this.
Page 9 The range of mxnual tempo control may be limited record, re-sample, pan, pitch, slip, and FX insert all by the speed of the storage device. If you use the unit with 4 outputs instead of summing to stereo, you could use an external mixing desk to kill the output from channel 1.
These are just a taste of some of the great features in Mxnual. The front panel has the familiar “tape deck” transport with Stop, Play, Record and Reverse instant backward playback buttons.
July 2, click for large image This page needs more stuff!
You can revert to all original panning, pitch and slip values of individual tracks by holding down the respective Pan, Pitch and Slip buttons. You can overdub where additional parts are added or mixed in with audio already recorded on a track.
It has done hundreds of gigs all over the EU, it hasn’t been sat in a studio rack! Barry Rudolph is an L. The unit is also missing a couple of small screws at either end – this means the end panels are ever so slightly loose, but again, this doesn’t effect the performance of the unit, and certainly wouldn’t be a concern if you were to put the unit into a rack.
After just weeks of using Repeater, it has become my favorite new toy In addition, you can connect an effects processor to Repeater’s FX Insert for easy patching of the effect onto the overall input or individual tracks. The sound quality is great– better than I am used to with loopers costing more.
Check out the SanDisk ImageMate, http: Page 7 Reverse Play is a fun way to realize reverse solos and ambient textures. I used Tap Tempo to help Repeater figure out tempos of audio that lack hard transients, such as loops without drums or percussion. For example, record a 1-bar drum loop and multiply it four times for a 4-bar drum loop.
Recording is like any other 4-track tape recorder, with the ability to use two tracks together for stereo sounds. You can always return to the tempo the loop was recorded at by pressing Stop and Tap Tempo at the same time.
Page 12 Tempo Lock button for 1 sec- ond. They make for a great performance tool and are extremely easy to use.
Select an open memory location on the display, arm a track and push Record. The CFC is slotted so that the card can only be Set this control so that the input level indicator is plugged in right side up. Page 36 P r o t o o l s Syncing to Protools is a two step process.
Repeater identifies the beat and tempo of your input audio and uses it to drive Repeater’s internal clock which determines the tempo of any recorded loop. In a per- formance setting, this feature allows you to pre-configure each loop for a unique tempo that will automatically be recalled the next time the loop is loaded.
Electrix Repeater Loopstation (with Box, Manual and Memory Card)
Any purchase you make through these links gives Looper’s Delight a commission to keep us going. Connecting this way will ensure safe passage of your tone through Repeater. Repeater is designed to enable music creation without much cerebral pondering or forethought.
If you do not record through the entire length of the loop Eldctrix will auto- matically keep recording until the end of the loop.
Back To Home Page.
If you are buying it anyway, why not let some of your cash go to your favorite web site? Before you buy a card make sure it is type 1 and that it is a high bandwidth card.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.